Ceiling.
As we know, the types of decoration of indoor ceilings are not very different from the kitchen finish.
The main difference in materials. For rooms, unstable materials or ceiling panels are used for high humidity. The most common indoor ceilings are plastered or two -level plasterboard ceilings. Of course, you will remember the suspended ceilings, but they are inferior in popularity above.
Choose your ceiling only to you. If necessary, soundproofing or point lighting is more suitable for a stretch or plasterboard ceiling, and low ceilings, as you know, need to be plastered. But in addition, there are exotic finishes, for example, when using colored glass, plastic, decorative plasters or gypsum stucco molding. But unfortunately, having no experience in these matters, it will be very difficult to cope.
Flooring in rooms
Next, go to the floor. What should it be? In addition to yourself, anyone is unlikely to answer this question, because your house is your house. In most apartments, they have a base pulled with light concrete or cement-sand mixture. The second option is the use of chipboard or plywood on wooden lags. And finally, the third, the innovation of the modern market – panels laid on clay filling and glued together.
Typically, the third and second options are used in old houses with wooden coatings, where the use of concrete and concrete -like mixtures is somewhat limited or not at all possible.
Screed.
Next, let’s talk about the screed of the floors. Usually, a dry screed is made with a thickness of 4 or 5 cm. When raising the floor, there is a backfill of expanded clay or polystyrene foam, these materials almost completely isolate the sound and have thermal properties. For a successful screed, a reinforcing welded grid is used.
So that there are no cracks in large -sized rooms, in the middle (from wall to wall), make technological sections.
In order to give the surface a perfectly flat shape at the end of the screed, if the wallet allows, the floor with self -alternating mixtures is leveled. These mixtures can also be used with almost even floor without cracks, because it is faster and cheaper to trim the floor than to remove its screed and install a new.
