To qualitatively replace the interior door, you need to strictly follow the technological standards. Otherwise, their non-compliance can lead, firstly, to improper installation, and secondly, to irreparable consequences, up to the complete remake of the repair.
It is worth noting that modern door manufacturers, including interior, try to use the highest quality in this production process at the same time, which is actually displayed on the final quality of the product. For example, the ocean doors are in great demand among buyers of such products due to an increased level of quality and additional characteristics, which, together, allow you to get quite high-quality and inexpensive interior doors. Depends on the quality of the installation directly and the life of the door. To mount interior doors with high quality, you need to strictly follow certain rules.
one. Measure the doorway correctly. It is better to contact a specialist for help. It is advisable to invite the measurer from the company from which you get the door. When measuring the opening, there are many nuances. Therefore, during measurements, your presence is desirable. You may have questions that need to be solved before transferring the order to the company.
2. Carefully inspect the door leaf delivered to you and the box. They should be ideal without cracks, scratches and chips.
3. Before proceeding directly to the installation of the door, all repairs of the floor should be completed. Otherwise it is pointless to order the door if the flooring is not yet laid.
four. The construction level is determined by the horizon and is noted on each side of the doorway. On both directions, the distance from the horizon to the floor is measured. Thus, the difference between the racks on the left and on the right side is determined. If the difference is revealed, it must be cut off.
5. The box is collected by the letter P, on a flat horizontal surface and preparations for further work are carried out.
6. The door box is installed in the opening. Loop and supporting racks are exhibited strictly according to the construction level.
7. The door leaf is installed.
eight. The door is dumped, you must first moisten the opening with clean water and glue the door box with a painting tape.
9. The final stage is the fastening of the door platbands.