Every day in countries is the popularity of fireplaces. The fireplace in the house means – beauty and comfort, it decorates the house. But you must understand that the appearance of a fireplace requires considerable costs, but it is worth it.
Let’s start building a fireplace.
At first we need to determine the overweight in which we build a fireplace. The fireboxes are made of refractory bricks and are formed from special concrete. Metal furnaces are well widespread at the moment. For better heat transfer, you can use cast -iron furnaces.
Framines are divided into 3 types: frontal, located in the corner and separately from all standing. Where the customer says the fireplace, but you need to pay attention to the fact that Cain does not stand in a draft.
You need to know the mass of the fireplace, if the mass of the fireplace is more than the bearing capacity of the coating, then you need to put the foundation under the fireplace.
The chimney is the center of the fireplace, it is responsible for the required traction in it. There are 3 types of chimney: suspended, based on a fireplace, built -in. The most economical chimneys during the construction of the fireplace are built -in. If it is difficult for you to make a choice will help you with a specialist.
We make the foundation for the fireplace
Build the foundation begin to dig a pit somewhere 20-40 cm deep. Then level the bottom of the recess and compact inside. The first layer should be filled with chopped stone, compacted with a tamping. Then tamped stones are filled with a solution, the main thing is that it is not thick. Then put a brick carefully. It is necessary to lay waterproofing before the extreme row of bricks in order to protect the oven from dampness. The gaps are filled with sand. Smoke from the fireplace through the chimney evenly air streams. So that it would be the walls of the chimney in nutria should be made even and smooth. Metal pipes are used for the chimney.
Do not forget about cleaning the chimney. If you do not clean the fireplace begins to smoke. The gathered soot can lead to fire and fire fireplace.
How to use fireplaces correctly?
Before setting fire to the fireplace, you need to slightly warm the chimney. To warm it up, set fire to a torch and warm up a chimney for several seconds.
To buy a fireplace, contact the fireplace store and you will pick up what you need.
