Currently, more and more often for the decor of houses, apartments, fences, etc. D. Use artificial stone. For this, two types of stone are used: flat and corner.
Want to buy a new TV, but don’t know where cheaper? Now they are selling inexpensive TVs in Orenburg prices for them are very low.
Stages of work:
one. First you must take into account the geometry and relief of the stone. If this is ignored, it will turn out not very beautiful. You can apply drawing to make it easier to imagine a wall in a stone. The styling options are very diverse, you need to carefully consider the type and pattern of the wall, since the stone will last you for a very long time.
2. Now you must prepare the surface of the wall. The room usually does not require the walls and do not require special training, so they are cleaned of the remains of wallpaper, dust, dirt, small defects, so that the wall is clean and even.
3. Next, it is necessary to treat the surface of the walls with an acrylic primer. But if the stone is overlaid on the drywall surface, it must be reinforced with a building mesh with a solution.
four. Next, you need to prepare the stone itself. It is also treated with an acrylic primer, it not only improves and enhances the fastening of the stone, but also does not allow it to absorb moisture from the solution, which can lead to cracking and failure of the stone.
5. The choice of adhesive solution and applying it to the surface. Apply an adhesive solution to an area of not more than 1m. sq., so that the glue does not have time to dry. You need to start glue from below – horizontally. The correct level of the next rows will depend on the correctness of the first line. You need to start from the far corner of the room and advance to the exit. The solution is applied with a width of approximately 3 mm spatula or trowel. This depth is most acceptable for fastening stone.
6. Be sure to make small gaps between the stones, this will give a more elegant look, and they can be filled with rustic mixtures if you want.
7. When you finish the work, you need to apply a protective coating, so it will be easier for you to take care of the stone.
