Laying paths made of stone, brick, bars, tiles suggests the presence of tools: shovels, trowel, pegs, ropes, guides, roulette, level and rubber hammer for ram. The construction of the garden paths is divided into stages: 1.Lay the route of the garden path and are determined with its width.
2.Drive wooden pegs every one and a half to two meters, pull the rope.
3.The track is indicated, proceed to digging to a depth of up to twenty centimeters.
four.Install guides, which use wooden boards, and nailed them to pegs.
5.The base of the path is aligned, compacted, checked by level and covered with gravel or broken brick.
6.Lay a layer, no more than five centimeters from slag or sand mixed with gravel. Align it, trim, water it with water and tamped again. Check the level for the evenness of the track. After all, wicker furniture for a cafe or cottage will stand on this coating and should provide comfort for vacationers.
7.Spread a stone one by one, driving it tightly into the sand with a rubber hammer. The empty space between the stones is filled with sand.
eight.Gently remove guides and pegs. Using a shovel, digging grooves for laying borders. So that the path always remains clean, the curb is made above the ground level. The bottom of the grooves for borders is made as well as the bottom of the garden path. Using a rubber hammer, the borders are installed.
9.Having installed the curbs, they pour the ground along the outer edge of the paths.
ten.Decorative plants and shrubs plant along the garden path.