PVC drainage systems are good for their maintainability. Individual damaged parts can be relatively easily replaced. Especially in those drainage systems where the connection is carried out without glue.
For repair, just buy a new part and quickly replace it. With metal gutters, it is more difficult. The main problems arise in places of joints of metal sheets. In this case, you need to clean the connection, replace the part and solder them with subsequent protection against corrosion using special paint. But with serious damage, the drain will have to be completely replaced.
At the same time, several basic installation rules are guided. So, the brackets, in which the gutter will be placed, must be fixed to the rafters or crate even before laying the roofing. They are set with a certain step, the value of which depends on the material from which the drains are made. But the pipe of the drainage system is installed only after decorative decoration of the facade. Each element will be attached to the walls using special brackets. And so that the gutters do not clog with snow and ice, it is necessary to install snow retainers.
Experts recommend buying a drainage system Alta Profile . The advantages of the plastic systems of the drain are the possibility of their operation in a wide temperature range (from -40 ° C to +70 ° C), resistance to precipitation and ultraviolet radiation, aesthetics, simple installation and wide color scheme. They also have a smooth inner surface, which reduces the likelihood of accumulating garbage, dirt, leaves in them.D. They can also be mounted on roofs of almost any degree of complexity.
